avgear

HD70L

AVG-HD70L SET

The HD70L is a cost-effective point-to-point extender set for HDMI 2.0 and IR signals; this kit supports 4K/UHD video @ 60 Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18Gbps, HDCP 2.2 compliant.

FEATURES

SPECIFICATIONS

  • Supports HDMI 2.0, up to 4K@60Hz 4:4:4, HDR 10, 18G, HDCP 2.2.
  • Extends 4K or 1080p HDMI signal up to 70 meters over a single CAT5e/6 cable.
  • HDMI loop out on transmitter.
  • Bi-directional IR pass-through.
  • Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device.
  • Features visually lossless compression with no latency.
  • EDID pass-through.
  • Compact design, easy to install and simple to operate.
 
USER MANUAL
SCHEMATIC
CUT SHEET
Transmitter
Input(1) SOURCE
Input Connector(1) 19-pin type-A female HDMI
Output(1) DISPLAY, (1) CATx OUT
Output Connector(1) 19-pin type-A female HDMI, (1) RJ45
Control(1) IR IN, (1) IR OUT
Control Connector(2) 3.5mm mini jacks
Receiver
Input(1) CATx IN
Input Connector(1) RJ45
Output(1) DISPLAY
Output Connector(1) 19-pin type-A female HDMI
Control(1) IR IN, (1) IR OUT
Control Connector(2) 3.5mm mini jacks
General
Video ResolutionUp to 4K@60Hz 4:4:4, HDR 10
HDMI Audio FormatSupports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch, Dolby Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS 5.1ch, DTS 96/24 5.1ch.
Transmission Distance4K/1080p ≤ 70 meters
HDMI VersionHDMI V2.0
HDCP VersionHDCP 2.2 compliant. (The HDCP of output follows the HDCP version of display device.)
EDIDSupports EDID Pass-through
Power SupplyInput: 100VAC~240VAC, 50/60Hz; Output: 12VDC 1A
Power Consumption4W (Max)
Operation Temperature-5~55℃
Storage Temperature-25~70℃
Relative Humidity10%-90%
Dimensions (W*H*D)80mm x 16.8mm x 80mm
Net WeightTx/Rx: 70g
Copyright © 2021 avgear. All rights reserved.

Enquire for HDMI 2.0 Extender with Loop out